Jaws Spitfire Acquisition Corporation
Built from real-time financials, refreshed daily. For a full Analyst Grade with bull/bear case, price targets, and qualitative risk analysis, generate a SPFR research report →
About the company
Jaws Spitfire Acquisition Corporation currently conducts no major business operations. Its primary objective is to finalize a business combination, such as a merger, stock exchange, acquisition of assets, share purchase, or other form of corporate restructuring, with one or more businesses or organizations. This entity, founded in 2020 and previously known as Spitfire Acquisition Corporation, is headquartered in Miami Beach, Florida.
- IPO
- 2020
- HQ
- Miami Beach, FL, US
Get TickerSpark's AI analysis on SPFR
Create an account to generate AI analysis on any ticker — technical setup, analyst consensus, earnings watch, insider pulse, financial health, and peer context. Ready in about a minute.
Get Pro Access →Already have an account? Log in
Similar companies
Peers in the same neighborhood.
- Market Cap
- $1.58B
- P/E
- -1.57
- PEG
- -0.01
- P/S
- 1.74
- P/B
- 0.82
- EV/EBITDA
- -2.43
- Div Yield
- 0.00%
- Gross Margin
- 8.23%
- Op Margin
- -86.34%
- Net Margin
- -86.33%
- ROE
- -59.51%
- ROIC
- -24.43%
Latest fiscal year · YoY change
- Revenue
- $45.97M+12.1%
- Gross Profit
- $-7,404,000-255.1%
- Op Income
- $-54,920,000
- Net Income
- $-71,362,000,000-97260.1%
- EPS
- $-4.33+0.0%
- OCF Growth
- +0.0%
- FCF Growth
- +0.0%
- 52W High
- $12.10
- 52W Low
- $8.40
- 50D MA
- $9.91
- 200D MA
- $10.05
- Beta
- 0.00
- Avg Volume
- 460.53K
Earnings call summaries
Pick a quarter — each call distilled into takeaways, results, and a bull vs bear read.
Velo3D delivered 50% year-over-year revenue growth and sharply improved gross margin in Q3, while reiterating full-year revenue guidance and pushing meaningful capital spending into 2027.· November 10, 2026
- Revenue rose 50% year over year to $20.5 million, with bookings of $28.9 million exceeding revenue for the quarter.
- Gross margin expanded to 26.5% from 3.2% a year ago, helped by pricing, mix, higher volumes, and manufacturing efficiencies.
- Cash improved to $75.7 million and debt fell to $7.4 million, and management said there is no longer substantial doubt about going concern.
- Full-year 2025 revenue guidance was reaffirmed at $65 million to $75 million; adjusted operating expense guidance stayed at $45 million to $55 million.
- Capex guidance was cut to $10 million to $20 million from $40 million to $50 million as spending shifts into 2027.
Third quarter 2026 revenue was $20.5 million, up 50% from $13.6 million in the year-ago quarter. Revenue from 3D printers and parts was $18.8 million, up 57% from $12.0 million. Gross margin was 26.5% versus 3.2% last year. GAAP net loss was $16.7 million, or $0.52 per share, compared with a net loss of $11.2 million, or $0.65 per share, a year ago; non-GAAP net loss was $10.8 million versus $9.3 million, and adjusted EBITDA was negative $9.8 million versus negative $7.3 million. The company generated $28.9 million in new bookings and ended with $40.1 million in backlog. Guidance: full-year 2025 revenue of $65 million to $75 million and non-GAAP adjusted operating expenses of $45 million to $55 million were reaffirmed; gross margin is expected to improve sequentially in Q4 2026, capex is now expected to be $10 million to $20 million versus the prior $40 million to $50 million range, and management now expects EBITDA and positive net cash provided by operating activities in 2028.
Arun Jeldi framed the quarter as another step in Velo3D’s execution, emphasizing stronger demand, bookings above revenue, and progress at the Livermore production campus. He said the company is building capacity for larger production programs and sees Livermore as a foundational investment in a more scalable, integrated manufacturing model. His tone was confident and optimistic, especially around 2027, which he described as a potential inflection point driven by expanded capabilities and new products.
Terence Wynn focused on the financial improvement in the quarter: revenue of $20.5 million, gross margin of 26.5%, operating expenses of $22.7 million, GAAP net loss of $16.7 million, and adjusted EBITDA of negative $9.8 million. He also highlighted the balance sheet, with cash and cash equivalents of $75.7 million and total debt of $7.4 million at September 30, 2026, versus $31 million at year-end 2025. He said the cash position and reduced debt provide flexibility while the company continues investing in infrastructure and that the business is targeting positive EBITDA and positive net cash from operations in 2028.
Analysts focused on why Q4 revenue guidance implies a possible sequential decline and whether there was seasonality; management said it remains confident in achieving the full-year guidance and pointed to customer timing and margin priorities. Questions also centered on the capex shift, with management explaining that the lower 2026 capex reflects timing of payments rather than a change in the Livermore build-out or the planned 2027 install base of about 40 machines. On profitability, management said the adjusted EBITDA breakeven point is below the $45 million to $50 million quarterly revenue level suggested by one analyst, but they would not pin down the exact number yet. Management also said a CFO search is in its final stages and they expect to announce a hire before year-end.
The call showed clear momentum: revenue grew 50%, bookings exceeded revenue, and gross margin improved sharply from a very low prior-year base. Management also sounded more confident on liquidity, debt reduction, supply chain diversification, and the ramp of Livermore, while saying defense demand and RPS opportunities are strengthening. The company’s plan to add productivity software and removable build modules in 2027 was presented as a path to higher throughput and better economics.
Despite the progress, the company still posted a negative adjusted EBITDA of $9.8 million and a GAAP net loss of $16.7 million, so profitability remains distant. Management also lowered 2026 capex sharply and pushed a substantial portion of spending into 2027, which underscores timing risk around the manufacturing ramp. The revenue outlook for Q4 appeared to leave room for sequential decline, and management did not provide a precise breakeven target, suggesting uncertainty around the pace of margin and operating leverage improvement.
AI summary of the company's earnings call · Paraphrased · Not investment advice
- Free Float
- 47.8%
- Shares Outstanding
- 187.56M
- Float Shares
- 89.56M
Our SPFR coverage
Recent articles, reports, and earnings notes.
No research on SPFR yet
For a full analyst-grade research report — grades, price targets, financials, chart analysis — generate one on demand.
Generate SPFR report →JAWS Spitfire Acquisition Corporation Announces Extraordinary General Meeting Teleconference Details
businesswire.com · Sep 22
Cathie Wood's ARK Invest Buys Nearly 320,000 Shares of This SPAC
247wallst.com · Sep 13
SPAC Wars: Desktop Metal Vs. Velo3D, Battle For 3D Printing
benzinga.com · Jul 1
Vertex Manufacturing Selects VELO3D to Meet Growing Demand for 3D Printing Production-Ready Metal Parts
businesswire.com · Jun 30
Cathie Wood Loads Up Another $292K In SpaceX Partner Velo3D's SPAC
benzinga.com · May 26
Wagner Machine Company Takes Delivery of VELO3D Manufacturing Solution for 3D Printing ‘Impossible' Parts
businesswire.com · May 4
VELO3D Adds Renowned Business Leader Stefan Krause to Board of Directors as Audit Committee Chair
businesswire.com · Apr 19
SHAREHOLDER ALERT: Monteverde & Associates PC Announces an Investigation of Jaws Spitfire Acquisition Corp. - SPFR
prnewswire.com · Mar 27
Headlines from third-party outlets — TickerSpark isn't affiliated with these sources.